The Second Laminations
1. In this section I go through the particular steps to ensure that the final alignment of the smudge boxes works out the way it was intended. In this video I am checking the orientation and trying to cut accordingly.
3. Here I have the cut pieces all laid out and I discuss how its going to work. This video also shows the confusion that can arise when the cutting sequence is changed. This was not intended but is a good example of why it is necessary to keep the orientation firmly in mind.
|
2. In this video I am cutting the laminations and marking the ends to keep the orientation correct. I only show the cutting of the pieces for the first box. The rest of the cutting for the remaining two boxes is similar.
4. This video covers the first step in the lamination process. Although I only show this being applied to one lamination, all the other laminations are carried out in the same manner.
|
5. Here I cover the second step of the lamination process and at the end talk about hot gluing the top and bottom together so that the blank can be cut. Alignment and orientation is also discussed again.
This is the last video in this section. The next is about preparing the blanks prior to starting the turning process. |
On to Preparing the Blanks or return to Methods of Work or Home |
It is going to take me some time to get all these videos posted here with my comments. The Preparing the Blanks videos are up on YouTube and can be viewed there on my channel: https://www.youtube.com/user/sumac4711. I will get the next videos up here as time permits. Please be patient.
Thanks.
Thanks.