Tips, Tricks & Techniques
Jim will post short videos to this page from time to time detailing the methods that he employs to produce his pieces. As the title suggests, these videos will show some of the ways Jim has developed to make the production of his work more enjoyable.
If you have any questions about these methods or you want more information please send Jim an email.
If you have any questions about these methods or you want more information please send Jim an email.
|
Removing a Bowl from the Lathe Jim does his finishing on the lathe. This has certain advantages, one being that the finish can be dust free. The trick is to remove the "wet" piece from the lathe without incident. Here is how he does it: |
|
|
Applying the Final Coat of Finish on the Lathe The final coat is always tricky. Sometimes it is best to tell yourself that it really the second last coat then you won't be disappointed if it doesn't work out. Jim has been there and he has worked out how to avoid some of the pitfalls that accompany finishing. Don't be in a hurry. Watch how Jim does it then give it a try. |
|
|
My Finishing Station This set up allows Jim to keep his brush and wipe rag wet with finish. This is especially helpful when he is finishing a number of pieces during the course of the day. There is no need for solvents. Rags and sponge brushes are very inexpensive when purchased in bulk. Here is how it works: |
|
Re-mounting a Finished Bowl on the LatheSome times a finish adjustment needs to be made after a bowl is completed. Other times a piece has received a lot of wear and tear and needs to be refinished or repaired. Here is one method that Jim uses to re-mount bowls on the lathe.
|
|
Turning a Rechuckable BottomHere is a method for turning a rechuckable bottom. A rechuckable bottom on highly functional turnings such as salad bowls means that the customer can have them refurbished if the piece suffers misadventure or simply needs refinishing. Any competent wood turner can update the piece.
|
|
